Craft DIY Fashion Sewing

D.I.Y. Black Cat Collar with Mollie Makes

This winter why not create the ultimate Black Cat and Broomsticks look with this super cute Black Cat Collar. It could even be used as a fashionable Halloween costume. It’s quick and easy to make, so get your meow on and get sewing! This project was originally featured in the October issue of Mollie Makes.

YOU WILL NEED

  • Two pieces of black cotton twill fabric, 43 x 32cm (17 x 12 58)
  • Iron-on interfacing, 43 x 32cm (17 x 12 58“)
  • White embroidery thread
  • Embroidery needle
  • Tailor’s chalk
  • Sewing thread in white and black
  • Spotty ribbon, 60cm (23 58“), 0.5cm (¼”) wide
  • Fabric glue
  • Two small gold bells
  • Hook and eye

METHOD

How to make a Halloween cat collar

Step 1

Back one piece of the black twill fabric with interfacing, following the manufacturer’s instructions. Pin to the second piece of black fabric with wrong sides together, sandwiching the layer of interfacing between the two.

You'll need Two pieces of black cotton twill fabric, 43 x 32cm (17 x 125/8") Iron-on interfacing, 43 x 32cm (17 x 125/8") White embroidery thread Embroidery needle Tailor’s chalk Sewing thread in white and black Spotty ribbon, 60cm (235/8"), 0.5cm (¼") wide Fabric glue Two small gold bells Hook and eye How to make the collar

Step 2

Use the template on page 99 to mark out a cat shape on the fabric, then carefully cut it out through both the layers, using scissors or a craft knife and cutting mat.

You'll need Two pieces of black cotton twill fabric, 43 x 32cm (17 x 125/8") Iron-on interfacing, 43 x 32cm (17 x 125/8") White embroidery thread Embroidery needle Tailor’s chalk Sewing thread in white and black Spotty ribbon, 60cm (235/8"), 0.5cm (¼") wide Fabric glue Two small gold bells Hook and eye How to make the collar

Step 3

Unpin the two fabrics. Using the template as a guide, mark the eye and eyelash placement onto one of the fabric shapes. Embroider on using three strands of white thread and small straight stitches.

You'll need Two pieces of black cotton twill fabric, 43 x 32cm (17 x 125/8") Iron-on interfacing, 43 x 32cm (17 x 125/8") White embroidery thread Embroidery needle Tailor’s chalk Sewing thread in white and black Spotty ribbon, 60cm (235/8"), 0.5cm (¼") wide Fabric glue Two small gold bells Hook and eye How to make the collar

Step 4

Pin the two pieces of fabric back together again, this time with right sides out. Sew around the outside of both pieces to join, as close as possible to the edge. Next, zigzag stitch or overlock all raw edges on the collar, including the gap above the cat’s tail. If using zigzag stitch, go around the edges two or three times on a 2.5 width and the tightest setting, trimming away any black ends as you go.

How to make a Halloween cat collar

Step 5

Wrap the ribbon around the cat’s neck and tie in a knot. Trim the loose ends at an angle and glue to the collar to secure in place, then sew the bells on top of the knot.

How to make a Halloween cat collar

Step 6

Sew the hook to the reverse of the ear, and the eye to the reverse of the top leg, using the image as a guide. These can then be used to fasten the collar when wearing.

You Might Also Like

No Comments

Leave a Reply